Multi-function thermo food mix processor is a kind of utensil for processing food. At present, there are multi-function food processors integrating heating and stirring in the market, which are quite convenient to use. In the prior art, the heating method of the multifunctional food processor generally uses high-temperature steam to heat the food. This food processor includes a main machine, a cup body, a cup cover and a stirring device. The main machine is equipped with a steam generator, and the steam generator The generated steam is directly introduced into the top of the cup body through the steam inlet arranged on the cup body, flows from the top to the bottom to heat the food, and finally is discharged from the cup cover. The manufacturer of the Multi-function thermo food mix processor tells you that in this type of steam flow channel, the steam temperature is high and easy to flow upward, causing the heat to flow upward, so the food at the upper end will be cooked first, and the food at the lower end will be cooked later Or the situation of undercooking occurs, the food is heated unevenly, which reduces the heat utilization rate, increases the cooking time, and causes more energy waste.

A scheme is proposed, a steam outlet is provided at the bottom of the cup body, a steam inlet is provided on the cup cover, and a steam channel is designed in the stirring device so that the steam channel connects the steam inlet and the steam outlet, so that the steam generated by the steam generator can flow from the cup The bottom of the body enters the cup body, so that the steam flows from the bottom to the top to heat the food, which has the advantages of uniform heating of the food, high steam utilization rate, high heating efficiency and energy saving. The manufacturer of the Multi-function thermo food mix processor tells you that although this solution has certain advantages, it is difficult to seal the position where the steam channel is connected to the inlet and outlet, which will still cause steam leakage, and all the steam cannot be injected into the cup from the bottom of the cup. There are still deficiencies in heating efficiency and heat utilization. At the same time, since the water tank of the steam generator is connected to the cup body through pipes, scalding accidents are prone to occur when the cup body is disassembled and cleaned, and the steam generator is built-in, so the water tank cannot be cleaned, and scale will form after long-term use, affecting food cleanliness .