Hold the container of the Multifunctional thermo food mixer and turn it to the right to decompose it. Cut the materials into appropriate-sized cubes and put them into the container. The parts are rotated and installed in the container. Stirring too hard materials or materials with too little moisture will cause the mixer to idle. At this time, you need to hold the two ends of the main unit and shake it gently, which can shorten the processing time of the ingredients. After the stirring work is completed, put the With the inlet of the container facing up, rotate the blade to separate.

Maintenance tips for Multifunctional thermo food mixer
1. Clean the mixer after every day of use. Use a damp towel to clean the mixing hook, the rack and the mixing tank. There should be no accumulation of water in the tank.
2. The Multifunctional thermo food mixer needs to be cleaned as a whole every week. Be careful not to rinse the equipment with water to prevent water from entering the bearings of electrical appliances or transmission parts, causing damage to the equipment. Check whether the equipment is placed smoothly.
3. Grease all the grease holes on the bearing seat with a grease gun once a month or every quarter, add lubricating oil to the chain and gear parts, check the tightness of the belt or chain, and prevent the belt or chain from being damaged due to slippage.
4. When the Multifunctional thermo food mixer is rotating, do not put fingers, chopsticks, knives, forks or spoons into the tank to avoid danger and accidents.
5. Do not pour water higher than 80 degrees Celsius into the tank, so as to prevent the plastic body from being deformed by heat.
6. After the mixer is used, the tank and the blade should be cleaned to keep the utensils clean and hygienic. When cleaning, press the bottom of the tank with your left hand, hold the tank with your right hand and rotate it counterclockwise to separate the tank from the tank bottom.
Seven, do not use gasoline, benzene and other solvents to clean the food mixer shell, so as not to damage the plastic body.
8. After using the Multifunctional thermo food mixer for a period of time, if you find that the top column of the switch button is inflexible, you can inject a few drops of edible oil into the two metal rods for lubrication.
9. Always check whether the riveting point of the tool is loose. If it is loose, it should be riveted in time; if the damage is serious and cannot be repaired, the tool should be replaced in time.
10. When not in use for a long time, the Multifunctional thermo food mixer should be cleaned, dried, put into a carton, and stored in a dry and ventilated place.